Marathon Engineering

MARATHON hydraulic baling machine is used to compress materials into compact bales for easier handling, storage, or transportation. The specifications of these machines can vary significantly depending on the material being baled (e.g., plastic, paper, metal), the required bale size, and the machine's power and capacity. Below are common specifications that manufacturers usually provide for hydraulic balers:

1. Baling Force (Pressure)

• Typically measured in tons.
• Range: 10 tons to 200 tons or more.
• Higher tonnage means more compression power, suitable for heavier or denser materials like metal.

2. Bale Size

• The size of the compacted bale.
• Common Sizes: 600mm × 400mm × 400mm, 1100mm × 700mm × 700mm, 1520mm × 760mm × 1200mm.
• Customizable depending on material and application.

3. Cycle Time

• The time it takes to complete one compression cycle.
• Range: 20 to 60 seconds, depending on machine capacity and size.

4. Hydraulic System Pressure

• Typical Range: 16 MPa (160 Bar) to 25 MPa (250 Bar).
• Higher pressure indicates more powerful baling.

5. Motor Power

• Power required to operate the hydraulic pump.
• Range: 7.5 kW to 30 kW or higher depending on size and force.

6. Bale Weight

• The weight of a fully compacted bale.
• Range: 20 kg to 1,200 kg, depending on material and machine size.

7. Material Type

• Common materials: cardboard, plastics (PET, HDPE), aluminum, steel cans, textiles, etc.

8. Baling Chamber Size

• The size of the area where materials are loaded and compressed.
• Range: 1,000mm × 800mm × 600mm to 1,800mm × 1,200mm × 1,500mm or more.

9. Operation Type

• Manual, semi-automatic, or fully automatic.
• Fully automatic machines will tie bales and eject them automatically.

10. Bale Tying System

• Manual or automatic tying.
• Steel wires or plastic strapping used to secure bales.

11. Loading Method

• Manual, conveyor feeding, or automatic feed depending on application.

12. Ejection System

• Manual, hydraulic ejector, or automatic bale ejection.

13. Control System

• Basic hydraulic controls or PLC (Programmable Logic Controller) for automation.

14. Weight and Dimensions

• Machine weight: 1,000 kg to 5,000 kg.
• Dimensions depend on the capacity but can range from 1,500 mm to over 6,000 mm in length.

15. Power Supply

• Voltage: Typically 220V or 380V, three-phase power.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

MARATHON ENGINEERING
Hydraulic cotton baling press machines are essential in the textile industry for compressing loose cotton into compact bales, facilitating easier handling, storage, and transportation. Below are detailed specifications of various models from different manufacturers:

• Automation: Fully automatic; performs cotton collecting, feeding, pushing, box rotating, releasing, baling, weighing, printing, and conveying.
• Structure: Frame-type release box with hydraulic pushing and tramping; main oil cylinder positioned upward.
• Hydraulics: Combines high-pressure hoses with steel pipes to minimize impact and prevent leaks.
• Safety: Equipped with automatic malfunction display and safety pedal.

• Capacity: 150 tons.
• Bale Size: 48" x 18" x 20".
• Production Rate: 3-4 bales per hour.
• Power Consumption: 20 HP.
• Material: Constructed from mild steel.
• Automation: Automatic operation.

• Capacity Options:
  • 60 tons: Bale size 1000 x 600 x 750 mm; bale weight 50-100 kg; stroke 1500 mm; 3-4 bales per hour; power 7.5 HP.
  • 100 tons: Bale size 1000 x 650 x 850 mm; bale weight 100-150 kg; stroke 1600 mm; 3-4 bales per hour; power 10 HP.
  • 200 tons: Bale size 1200 x 450 x 600 mm; bale weight 150-160 kg; stroke 2500 mm; 4-5 bales per hour; power 15 HP.
• Bale Ejection: Hydraulic.
• Type: Available in semi-automatic and fully automatic versions.

• Press Capacity: 100 tons.
• Operating Pressure: Up to 210 bar.
• Cabin Dimensions: 950 x 1115 x 2250 mm.
• Stroke Length: Maximum of 2000 mm.
• Stroke Speed: Adjustable up to 2 m/min.

Source: Lohia Hydraulic Bale Press

• Pressing Force: 20 tons.
• Baling Chamber Size: 460 x 970 x 1330 mm.
• Bale Size: 460 x 970 x 700 mm.
• Max Bale Weight: 90 kg.
• Baling Rate: 3-4 bales per hour.
• Motor Power: 11 kW.

When selecting a hydraulic cotton baling press machine, consider factors such as automation level, capacity, bale size, production rate, power consumption, and material construction to ensure it meets your specific operational requirements.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.

Hydraulic vertical scrap baling machines are essential for compacting various recyclable materials, including metals, plastics, paper, and textiles, into dense bales. This process facilitates efficient storage, transportation, and recycling. Below is a detailed overview of the specifications and features of these machines:

1. Compression Force

• Typically ranges from 10 to 100 tons, depending on the model and application.

2. Bale Size and Weight

• Dimensions: Common bale sizes include 800 x 400 x 800 mm and 1150 x 750 x 1000 mm.
• Weight: Bale weights can vary from 50 kg to over 200 kg, influenced by the material type and machine capacity.

3. Machine Dimensions and Weight

• Size: Machines can measure approximately 1.4 x 0.7 x 2.9 meters to larger dimensions based on capacity.
• Weight: Ranges from 400 kg for smaller models to over 2,000 kg for heavy-duty machines.

4. Power Requirements

• Motor Power: Typically between 5.5 kW to 17 kW, depending on the machine's compression force and operational needs.

5. Cycle Time and Efficiency

• Baling Speed: Standard models achieve 6 to 10 bales per hour, with cycle times around 70 to 80 seconds per bale.

6. Loading and Operation

• Loading Method: Materials are loaded from the top into the compression chamber.
• Operation: Machines feature user-friendly controls, often with hydraulic hand levers or electrical systems for efficient operation.

7. Safety Features

• Equipped with safety mechanisms such as emergency stop buttons, safety interlocks, and protective guards to ensure operator safety.

8. Applications

• Materials: Suitable for compressing a variety of materials, including:
  • Scrap metals (steel, aluminum, copper)
  • Plastic bottles and containers
  • Cardboard and paper waste
  • Textiles and clothing

9. Additional Features

• Hydraulic System: Designed for high efficiency with components like hydraulic cylinders, motors, and oil tanks.
• Binding: Bales are typically secured using steel wires or plastic straps, manually slotted in the pressing block.

Example Models:

• SL-10T Vertical Baler

  • Compression Force: 10 tons
  • Bale Size: 800 x 400 x 800 mm
  • Machine Dimensions: 1.4 x 0.7 x 2.9 meters
  • Motor Power: 5.5 kW
  • Baling Speed: 8-10 bales per hour
  • Weight: 400 kg

• SL-60T Vertical Baler

  • Compression Force: 60 tons
  • Bale Size: 1150 x 750 x 1000 mm
  • Machine Dimensions: 1.7 x 1.0 x 3.2 meters
  • Motor Power: 15 kW
  • Baling Speed: 6-10 bales per hour
  • Weight: 1600 kg

These specifications are indicative and can vary based on the manufacturer and specific model. When selecting a hydraulic vertical scrap baling machine, consider factors such as the type of material to be baled, required bale size and weight, production capacity, available space, and power supply. Consulting with manufacturers or suppliers can provide tailored solutions to meet specific operational needs.